However, the MIB structure determines the scope of management access allowed by a device. H0 @ HpEdU`?I#L@#1W? Extreme Networks 2-Axis Rotational Variable Extension AP (MBO-ART03) Also, the device supports the configuration of trap hosts as a trap recipient to receive filtered traps based on their severity level, and optionally receive SNMP communication through a VRF. snmp-server preserve-statistics command is enabled, SNMP MIB statistics are preserved .i.e )You might need to reset the IP address on your PC to some address (for example, 10.10.10.10 255.255.255.0) to avoid IP conflict. A few weeks ago i've ran through a complicated upgrade process starting from 11.26.3.5 and finally reaching 19.5.1.7, so yes, we are running hive manager classic on premise. WiNG AP 7632 - Extreme Networks - VX 9000 Virtualized Controller The user name and password are the same as those you use to log on to the command-line interface. No to continue with installation. authorization group assigned the ExtremeCloud IQ - Site Engine ExtremeAnalytics Read Access or Read/Write Access capability. The agent receive requests from the SNMP manager and responds with the requested data. S- K- and 7100-Series Configuration Guide %%EOF snmp-server preserve-statistics command by enabling or disabling these MIB statistics when the ExtremeXOS User Guide Also included are supported platforms and recommended best practices for optimal Main use cases: Monitoring of Fortigate by Extreme Management Center UserID to IP mapping through Radius Single Sign On (RSSO) Distributed IPS Solution 1 of 11 Related Resources Verify that the system LEDs are on (solid green or blinking green). In addition to Enter user: Download the software to your PC from the. Summary of Contents for Extreme Networks Altitude 4700 Series Page 1 Altitude 4700 Series Access Point Installation Guide Extreme Networks, Inc. 3585 Monroe Street Santa Clara, California 95051 (888) 257-3000 (408) 579-2800 http://www.extremenetworks.com Published: January 2011 Part Number: 100383-00 Rev 01. The MIB is is structured on the standard specified in the RFC 2578 [Structure of Management Information Version 2 (SMIv2)]. Spectralink VIEW Certified Configuration Guide: Extreme Networks 721-1012-000_E.docx December 2017 9 Provisioning the Wireless Controller AP Registration The Configuring the ExtremeWireless APs section of the ExtremeWireless User's Guide describes how to discover and setup default radio properties for APs. Basic Configuration Using the Management Interface Once the NX-5500 hardware is installed and powered on, complete the following to access the Management Interface functions: Connect one end of an Ethernet cable to one of the ports on the front of the NX-5500, and connect the other end to a computer with a working Web browser. ExtremeXOS Command Reference Guide Version30.7, Introduction to the ExtremeXOS Command Reference, clear bootprelay ipv6 prefix-delegation snooping, clear counters cfm segment all frame-delay, clear counters cfm segment all frame-loss, clear counters cfm segment frame-loss mep, clear counters virtual-network remote-endpoint, clear ip-security anomaly-protection notify cache, clear ip-security arp validation violations, clear ip-security source-ip-lockdown entries ports, configure access-list action-resolution highest-priority, configure access-list action-resolution multiple, configure access-list rule-compression port-counters, configure access-list vlan-acl-precedence, configure account password-policy char-validation, configure account password-policy history, configure account password-policy lockout-on-login-failures, configure account password-policy lockout-time-period, configure account password-policy max-age, configure account password-policy min-age, configure account password-policy min-different-characters, configure account password-policy min-length, configure bfd hardware-assist loopback-port, configure bgp add confederation-peer sub-AS-number, configure bgp delete confederation-peer sub-AS-number, configure bgp neighbor alternate-local-as, configure bgp neighbor route-reflector-client, configure bgp peer-group remote-AS-number, configure bgp peer-group route-reflector-client, configure bgp peer-group source-interface, configure bootprelay dhcp-agent information check, configure bootprelay dhcp-agent information circuit-id port-information, configure bootprelay dhcp-agent information circuit-id vlan-information, configure bootprelay dhcp-agent information option, configure bootprelay dhcp-agent information policy, configure bootprelay dhcp-agent information remote-id, configure bootprelay dhcp-agent source-vlan, configure bootprelay ipv6 option interface-id, configure bootprelay ipv6 option remote-id, configure bootprelay ipv6 prefix-delegation snooping add, configure bootprelay ipv6 prefix-delegation snooping, configure bootprelay vlan include-secondary, configure cfm domain add association integer, configure cfm domain add association string, configure cfm domain add association vlan-id, configure cfm domain add association vpn-id oui index, configure cfm domain association add remote-mep, configure cfm domain association delete remote-mep, configure cfm domain association destination-mac-type, configure cfm domain association end-point add group, configure cfm domain association end-point delete group, configure cfm domain association end-point transmit-interval, configure cfm domain association ports end-point ccm, configure cfm domain association ports end-point mepid, configure cfm domain association ports end-point sender-id-ipaddress, configure cfm domain association ports end-point, configure cfm domain association remote-mep mac-address, configure cfm segment add domain association, configure cfm segment delete domain association, configure cfm segment frame-delay/frame-loss transmit interval, configure cfm segment frame-loss consecutive, configure cfm segment frame-loss ses-threshold, configure dhcp ipv6 client identifier-type, configure diffserv examination code-point qosprofile, configure diffserv replacement code-point, configure dns cache analytics [add | delete] protected-client, configure dns cache add | delete name-server, configure dos-protect type l3-protect alert-threshold, configure dos-protect type l3-protect notify-threshold, configure eaps multicast temporary-flooding duration, configure eaps multicast temporary-flooding, configure eaps shared-port common-path-timers, configure eaps shared-port segment-timers expiry-action, configure eaps shared-port segment-timers health-interval, configure eaps shared-port segment-timers timeout, configure elrp-client dynamic-vlans action, configure elrp-client dynamic-vlans client/uplink ports/remote-endpoints vxlan, configure elrp-client inter-vlan-loop-detection, configure esrp aware add selective-forward-ports, configure esrp aware delete selective-forward-ports, configure esrp elrp-premaster-poll disable, configure esrp elrp-premaster-poll enable, configure fabric attach port authentication, configure forwarding hash-recursion-level, configure forwarding ipmc local-network-range, configure forwarding L2-protocol fast-convergence, configure forwarding rate-limit overhead-bytes, configure forwarding vpex ipmc replication, configure forwarding vpex vlan-port-filter, configure identity-management role-based-vlan, configure identity-management access-list, configure identity-management database memory-size, configure identity-management kerberos snooping aging time, configure identity-management kerberos snooping force-aging time, configure identity-management kerberos snooping forwarding, configure identity-management kerberos snooping server, configure identity-management list-precedence, configure identity-management role add child-role, configure identity-management role add dynamic-rule, configure identity-management role add policy, configure identity-management role delete child-role, configure identity-management role delete dynamic-rule, configure identity-management role delete policy, configure identity-management role match-criteria inheritance, configure identity-management role priority, configure identity-management stale-entry aging-time, configure igmp router-alert receive-required, configure igmp snooping vlan ports add dynamic group, configure igmp snooping vlan ports add static group, configure igmp snooping vlan ports add static router, configure igmp snooping vlan ports delete static group, configure igmp snooping vlan ports delete static router, configure igmp snooping vlan ports filter, configure igmp snooping vlan ports set join-limit, configure inline-power disconnect-precedence, configure inline-power operator-limit ports, configure iparp proxy reachable | entry-required, configure ip-fix ports flow-key ipv4 mask ipaddress, configure ip-fix ports flow-key ipv6 mask ipaddress, configure ipforwarding originated-packets, configure iproute add blackhole ipv4 default, configure iproute add blackhole ipv6 default, configure iproute delete blackhole ipv4 default, configure iproute delete blackhole ipv6 default, configure iproute protection ping interval, configure iproute sharing hash-algorithm crc, configure iproute sharing hash-method custom, configure ip-security anomaly-protection icmp ipv4-max-size, configure ip-security anomaly-protection icmp ipv6-max-size, configure ip-security anomaly-protection notify cache, configure ip-security anomaly-protection notify rate limit, configure ip-security anomaly-protection notify rate window, configure ip-security anomaly-protection notify trigger off, configure ip-security anomaly-protection notify trigger on, configure ip-security anomaly-protection tcp, configure ip-security dhcp-bindings delete, configure ip-security dhcp-bindings storage filename, configure ip-security dhcp-bindings storage location, configure ip-security dhcp-bindings storage, configure ip-security dhcp-snooping information check, configure ip-security dhcp-snooping information circuit-id port-information port, configure ip-security dhcp-snooping information circuit-id vlan-information, configure ip-security dhcp-snooping information option, configure ip-security dhcp-snooping information policy, configure ip-security dhcp-snooping information remote-id, configure isis area delete summary-address, configure isis area interlevel-filter level 1-to-2, configure isis area interlevel-filter level 2-to-1, configure isis area overload-bit on-startup, configure isis area timer lsp-gen-interval, configure isis area timer lsp-refresh-interval, configure isis area timer max-lsp-lifetime, configure isis timer restart-hello-interval, configure lldp med fast-start repeat-count, configure lldp ports dcbx add application, configure lldp ports dcbx delete application, configure lldp ports vendor-specific avaya-extreme call-server, configure lldp ports vendor-specific avaya-extreme dot1q-framing, configure lldp ports vendor-specific avaya-extreme file-server, configure lldp ports vendor-specific avaya-extreme poe-conservation-request, configure lldp ports vendor-specific dcbx, configure lldp ports vendor-specific dot1 port-protocol-vlan-ID, configure lldp ports vendor-specific dot1 port-vlan-ID, configure lldp ports vendor-specific dot1 vlan-name, configure lldp ports vendor-specific dot3 link-aggregation, configure lldp ports vendor-specific dot3 mac-phy, configure lldp ports vendor-specific dot3 max-frame-size, configure lldp ports vendor-specific dot3 power-via-mdi, configure lldp ports vendor-specific med capabilities, configure lldp ports vendor-specific med location-identification, configure lldp ports vendor-specific med policy application, configure lldp ports vendor-specific med power-via-mdi, configure lldp snmp-notification-interval, configure log target memory-buffer alert percent-full, configure log target xml-notification filter, configure mac-lockdown-timeout ports aging-time, configure mac-locking ports first-arrival aging, configure mac-locking ports first-arrival limit-learning, configure mac-locking ports first-arrival link-down-action, configure mac-locking ports first-arrival move-to-static, configure mac-locking ports learn-limit-action, configure mac-locking ports static delete station, configure mac-locking ports static limit-learning, configure macsec connectivity-association, configure mirror to remote-ip protocol-type, configure mld snooping vlan ports add dynamic group, configure mld snooping vlan ports add static group, configure mld snooping vlan ports add static router, configure mld snooping vlan ports delete static group, configure mld snooping vlan ports delete static router, configure mld snooping vlan ports join-limit, configure mpls rsvp-te bandwidth committed-rate, configure mpls rsvp-te lsp path use profile, configure mpls rsvp-te profile (fast-reroute), configure mpls rsvp-te timers lsp rapid-retry, configure mpls rsvp-te timers lsp standard-retry, configure msrp ports traffic-class delta-bandwidth, configure msrp timers first-value-change-recovery, configure neighbor-discovery cache delete, configure neighbor-discovery cache locktime, configure neighbor-discovery cache max_entries, configure neighbor-discovery cache max_pending_entries, configure neighbor-discovery cache reachable-time, configure neighbor-discovery cache retransmit-time, configure neighbor-discovery cache timeout, configure netlogin allowed-refresh-failures, configure netlogin authentication database-order, configure netlogin authentication failure vlan, configure netlogin authentication protocol-order, configure netlogin authentication service-unavailable vlan, configure netlogin dot1x eapol-transmit-version, configure netlogin dynamic-vlan uplink-ports, configure netlogin local-user security-profile, configure netlogin mac timers reauth-period, configure netlogin port allow egress-traffic, configure network-clock gptp ports announce, configure network-clock gptp ports peer-delay, configure network-clock clock-source input, configure network-clock clock-source output, configure network-clock ptp add unicast-master, configure network-clock ptp announce interval, configure network-clock ptp boundary delete unicast-slave, configure network-clock ptp boundary add vlan, configure network-clock ptp delay-request-interval, configure network-clock ptp boundary add unicast-slave, configure network-clock ptp announce timeout, configure network-clock ptp delete unicast-master, configure network-clock ptp end-to-end transparent, configure network-clock ptp sync-interval, configure network-clock sync-e clock-source, configure ospf area nssa stub-default-cost, configure ospf area stub stub-default-cost, configure ospfv3 virtual-link restart-helper, configure pim register-rate-limit-interval, configure pim register-suppress-interval register-probe-interval, configure pim state-refresh timer origination-interval, configure pim state-refresh timer source-active-timer, configure policy app-signature group name pattern, configure policy app-signature minimum-ttl, configure policy captive-portal listening, configure policy convergence-endpoint clear, configure policy convergence-endpoint index, configure policy convergence-endpoint ports, configure ports link-flap-detection action, configure ports link-flap-detection interval threshold disable-time, configure process group other memory-limit, configure qosscheduler weighted-deficit-round-robin, configure radius-accounting server client-ip, configure radius-accounting shared-secret, configure radius dynamic-authorization server client-ip, configure sharing address-based custom hash-seed, configure sharing health-check member-port add tcp-tracking, configure sharing health-check member-port delete tcp-tracking, configure sharing health-check member-port tcp-tracking, configure sharing lacp defaulted-state-action, configure snmp notification-log filter-profile-name, configure stacking-support auto-discovery, configure stpd loop-protect event-threshold, configure stpd ports edge-safeguard disable, configure stpd ports edge-safeguard enable, configure stpd ports loop-protect partner, configure stpd ports restricted-role disable, configure stpd ports restricted-role enable, configure tacacs-accounting shared-secret, configure tech-support collector data-set, configure tech-support collector frequency error-detected, configure trusted-ports trust-for dhcp-server, configure upm profile maximum execution-time, configure virtual-network add network ports, configure virtual-network delete network ports, configure virtual-network remote-endpoint vxlan ipaddress, configure virtual-network remote-endpoint vxlan ipaddress monitor, configure vlan add ports private-vlan translated, configure vlan delete secondary-ipaddress, configure vlan router-discovery add prefix, configure vlan router-discovery default-lifetime, configure vlan router-discovery delete prefix, configure vlan router-discovery managed-config-flag, configure vlan router-discovery max-interval, configure vlan router-discovery min-interval, configure vlan router-discovery other-config-flag, configure vlan router-discovery reachable-time, configure vlan router-discovery retransmit-time, configure vlan router-discovery set prefix, configure vlan-translation add loopback-port, configure vlan-translation add member-vlan, configure vlan-translation delete loopback-port, configure vlan-translation delete member-vlan, configure vm-tracking authentication database-order, configure vrrp vlan vrid add track-iproute, configure vrrp vlan vrid add virtual-link-local, configure vrrp vlan vrid advertisement-interval, configure vrrp vlan vrid delete track-iproute, configure vrrp vlan vrid delete track-ping, configure vrrp vlan vrid delete track-vlan, configure vrrp vlan vrid delete ipaddress, configure xml-notification target add/delete, create virtual-network remote-endpoint vxlan ipaddress, delete virtual-network remote-endpoint vxlan ipaddress, disable bgp export [static | direct] l2vpn-evpn, disable bgp neighbor address-family l2vpn-evpn, disable bgp neighbor capability address-family vpnv4, disable bgp neighbor remove-private-AS-numbers, disable bgp peer-group capability address-family vpnv4, disable bgp peer-group remove-private-AS-numbers, disable cfm segment frame-delay measurement, disable cfm segment frame-loss measurement mep, disable dot1p examination inner-tag ports, disable ethernet oam ports link-fault-management, disable ip-security anomaly-protection icmp, disable ip-security anomaly-protection ip, disable ip-security anomaly-protection l4port, disable ip-security anomaly-protection notify, disable ip-security anomaly-protection tcp flags, disable ip-security anomaly-protection tcp fragment, disable ip-security arp gratuitous-protection, disable ip-security arp learning learn-from-arp, disable ip-security arp learning learn-from-dhcp, disable ip-security dhcp-bindings restoration, disable ip-security source-ip-lockdown ports, disable l2vpn vpls peer fdb send-mac-withdrawal, disable netlogin authentication failure vlan ports, disable netlogin authentication service-unavailable vlan ports, disable netlogin reauthenticate-on-refresh, disable ospfv3 virtual-link restart-helper-lsa-check, disable switch locally-administered-address, disable virtual-network remote-endpoint vxlan, enable bgp export [static | direct] l2vpn-evpn, enable bgp neighbor address-family l2vpn-evpn, enable bgp neighbor capability address-family vpnv4, enable bgp neighbor remove-private-AS-numbers, enable bgp peer-group capability address-family vpnv4, enable bgp peer-group remove-private-AS-numbers, enable cfm segment frame-delay measurement, enable cfm segment frame-loss measurement mep, enable ethernet oam ports link-fault-management, enable ip-security anomaly-protection icmp, enable ip-security anomaly-protection l4port, enable ip-security anomaly-protection notify, enable ip-security anomaly-protection tcp flags, enable ip-security anomaly-protection tcp fragment, enable ip-security arp gratuitous-protection, enable ip-security arp learning learn-from-arp, enable ip-security arp learning learn-from-dhcp, enable ip-security arp validation violation-action, enable ip-security dhcp-bindings restoration, enable ip-security source-ip-lockdown ports, enable l2vpn vpls peer fdb send-mac-withdrawal, enable netlogin authentication failure vlan ports, enable netlogin authentication service-unavailable vlan ports, enable netlogin reauthentication-on-refresh, enable network-clock ptp end-to-end transparent, enable network-clock ptp unicast-negotiation, enable ospfv3 virtual-link restart-helper-lsa-check, enable switch locally-administered-address, enable virtual-network remote-endpoint vxlan, show bgp neighbor [flap-statistics | suppressed-routes], show bootprelay dhcp-agent information circuit-id port-information, show bootprelay dhcp-agent information circuit-id vlan-information, show bootprelay ipv6 prefix-delegation snooping, show cfm segment frame-delay/frame-loss mep id, show dns cache analytics protected-client, show ip-security anomaly-protection notify cache ports, show ip-security arp gratuitous-protection, show ip-security arp validation violations, show ip-security dhcp-snooping information circuit-id port-information, show ip-security dhcp-snooping information-option, show ip-security dhcp-snooping information-option circuit-id vlan-information, show ip-security dhcp-snooping information remote-id, show ip-security dhcp-snooping violations, show log configuration target xml-notification, show netlogin authentication failure vlan, show netlogin authentication service-unavailable vlan, show network-clock ptp boundary unicast-master, show network-clock ptp boundary unicast-slave, show policy convergence-endpoint connections, show ports stack-ports qosmonitor congestion, show ports transceiver information detail, show virtual-network remote-endpoint vxlan, unconfigure bootprelay dhcp-agent information check, unconfigure bootprelay dhcp-agent information circuitid port-information, unconfigure bootprelay dhcp-agent information circuitid vlan-information, unconfigure bootprelay dhcp-agent information option, unconfigure bootprelay dhcp-agent information policy, unconfigure bootprelay dhcp-agent information remote-id, unconfigure bootprelay dhcp-agent source-vlan, unconfigure cfm domain association end-point transmit-interval, unconfigure identity-management list-precedence, unconfigure igmp snooping vlan ports set join-limit, unconfigure inline-power disconnect-precedence, unconfigure inline-power operator-limit ports, unconfigure ip-security dhcp-snooping information check, unconfigure ip-security dhcp-snooping information circuit-id port-information ports, unconfigure ip-security dhcp-snooping information circuit-id vlan-information, unconfigure ip-security dhcp-snooping information option, unconfigure ip-security dhcp-snooping information policy, unconfigure ip-security dhcp-snooping information remote-id, unconfigure netlogin allowed-refresh-failures, unconfigure netlogin authentication database-order, unconfigure netlogin authentication failure vlan, unconfigure netlogin authentication service-unavailable vlan, unconfigure netlogin local-user security-profile, unconfigure network-clock sync-e clock-source, unconfigure policy app-signature group name, unconfigure policy captive-portal listening, unconfigure policy convergence-endpoint all, unconfigure policy convergence-endpoint index, unconfigure stacking alternate-ip-address, unconfigure trusted-ports trust-for dhcp-server, unconfigure vlan router-discovery default-lifetime, unconfigure vlan router-discovery hop-limit, unconfigure vlan router-discovery link-mtu, unconfigure vlan router-discovery managed-config-flag, unconfigure vlan router-discovery max-interval, unconfigure vlan router-discovery min-interval, unconfigure vlan router-discovery other-config-flag, unconfigure vlan router-discovery reachable-time, unconfigure vlan router-discovery retransmit-time.